• for countersinking, chamfering and deburring metal and plastic
• wear-resistant and precise
• 1/4" hexagonal shaft

Ideal for mounting our RK-Fixed-HST - Lift-Up Sliding Door.

to the article

Step Drill:

• specially adapted to Ø18 mm holes for our Widening Stabiliser
• drills through sheet steel or stainless steel up to 2 mm thick
• with spiral groove and cross cut

Extension:

• for pre-drilling of widening profiles

to the article

• for fastening connecting profiles
• offers high load transfer for structure heights from 130 to 260 mm
• can be attached to the connection profile with the short or long leg, depending on the structure height

to the article

• for upward mounting in the case of lift-up sliding doors with roller shutter box
• mounting position is cut free by drilling
• simple and quick fastening to steel girders and concrete lintels

to the article

• connection profile with good screw properties
• solid profile
• good insulating properties
• connector system
• processing without waste

to the article

• bracing for widening profiles at the top
• fastening is possible as blocking point or floating bearing
• no steel reinforcement needed

to the article

• Hybrid adhesive and sealant
• can be used indoors and outdoors
• suitable for use on damp surfaces
• fast curing with almost no shrinkage
• does not cause corrosion
• contains no isocyanates, silicones or solvents
• can be painted over immediately after application with water-thinnable paints

Particularly easy and precise to apply with our XL applicator gun.

to the article

• for tube bags and conventional sealant and adhesive cartridges from 310 to 600 ml
• lever transmission of approx. 400 kg at low effort
• dispensing tip included
• robust and corrosion-free metal construction
• low dead weight facilitates working

Excellent for our adhesive - MS FLEXI AD Polymer.

to the article

• extension of the masonry for fastening in the insulation layer
• moisture resistant
• high load transfer
• easy and quick to install

The Static frame - MTF-System is glued to the masonry. It acts as an extension of the masonry and enables a window fastening in the reveal. The window frame can be directly screwed together with the Static frame. We also offer a suitable adhesive (MS FLEXI AD Polymer).

to the article

The SL-Console offers a high load transference with great overhand. The enclosed Protection Plate protects the masonry and distributes point load to area load. Especially softer bricks and sealing foils thus are not damaged. The SL-Console can be combined with many other K-Universal anchors.

The articles highlighted in blue are newly added article sizes.

to the article

• suitable for all window systems (aluminium, wood and plastic)
• easily adjustable blocking
• can be adjusted from above, below and from the side

The WU-strut combines an angle with the WU-Adjusting Element to bridge differences in height. The adjusting element can be adjusted from above, below and laterally. This creates a blocking which stays adjustable. Depending on the chosen article size the WU-strut can be deployed for differences in height between 85 mm and 220 mm. 

to the article

New sizes of the SFK anchor added to the standard range!

Protects the masonry and distributes point load to area load. Protects the seal.

Use in combination with SL console and HST-SL console.